These are projected dimensions and specifications for our new steel hybrid. They won’t change much, but as noted below don’t build a hearth or install a chimney thimble based on these specifications. EPA testing is scheduled to begin in 3 weeks, with UL testing (clearances) following immediately thereafter.
Target Dimensions and Specifications:
Do not build a hearth or chimney until you have confirmed dimensions. If you do, we are not responsible!
Target Dimensions (Base Model)
| |
Footprint:
|
25” W x 20” D
|
Overall (H x W x D):
|
33.25 x 30” x 27.25 (includes ash lip, skirting, controls)
|
Flue Size:
|
6”
|
Flue Exit:
|
Top or Rear
|
Rear Flue Height (Center):
|
28.25”
|
Reduced Height Version:
|
Subtract 2” from overall height and flue height
|
Target Dimensions (Tall Shaker Version)
| |
Footprint:
|
27.75” W x 21” D
|
Overall (H x W x D):
|
47” x 27.75” x 24”
|
Flue Size:
|
6”
|
Flue Exit:
|
Top or Rear
|
Rear Flue Height (Center):
|
42”
|
Target Firebox
| |
Advanced Hybrid Design:
|
Secondary Burn, Catalyst, Aux Air
|
Firebox Size:
|
2.5 cu. ft.
|
Maximum Log Length:
|
19”
|
Recommended Log Length:
|
16”
|
Door Opening:
|
12” W x 10”H
|
Left or Right Loading Door: Left or Right Ash Pan Opening
| |
Firebox Liner:
|
Soapstone
|
Draft Control:
|
Manual (one lever)
|
Window Size (viewable):
|
14.5W x 13H
|
Ash Pan:
|
Optional
|
Outside Air Adapter:
|
Standard
|
Target Performance
| |
Heat Output (EPA Test Method):
|
10,000-55,000 BTU/hr
|
Efficiency:
|
81% HHV
|
Emissions (EPA Crib Method):
|
less than 1.0 gm/hr weighted average or better
|
Cordwood Emissions (EPA approved method):
|
less than 1.0 gm/hr weighted average or better
|
Burn Time:
|
10-14 Hours
|
Target Clearances
| |
Rear (no protection):
|
12”
|
Rear (with Heat Shield):
|
6”
|
Sides (no protection):
|
18”
|
