Home Page: Click here

www.woodstove.com

Showing posts with label EPA. EPA Test. Show all posts
Showing posts with label EPA. EPA Test. Show all posts

Tuesday, November 28, 2017

Meet the New Survival Stove

Survival Stove - The Orchard
For the last 14 months, we’ve been working vigorously to develop a small hybrid wood and coal stove for the Navajo Nation - a stove that is clean, efficient and inexpensive.  The development of that stove is finished, and we’ll begin shipping Navajo Stoves to the Navajo reservation in late December/early January.

Now we want to introduce the related Survival Stove - a small hybrid wood stove which we will also begin shipping at the end of this year.  This stove shares the same wood combustion technology as the Navajo Stove and is designed to heat about 1,000 sq. ft., with a hybrid combustion system that is 79.43% efficient, has average emissions of 1.05 gm/hr and produces 15,332-27,294 BTU/hr under the current EPA test protocols.

Survival Stove - The Lodge
The Survival Stove has been a big hit with our internal beta testers.  The firebox is small (1.15 cu ft) but the stove puts out a lot of heat.  It’s very clean and very efficient.  It doesn’t take up too much space - the hearth pad for this stove is just 32” wide x 40” deep.  Clearances are just 9” from the corners, sides and back to combustible walls.  Height is adjustable.  Each stove comes with an ash pan and all close-clearance shields.  We have also designed three tools (poker, ash rake, and shovel) that hang from the side shield.


Specifications and prices to follow in the next few days!  

Saturday, June 4, 2016

Summer is Here and the “Livin’ is Easy”

We have entered into the sixth month of our calendar year – half way through 2016!  June is here, and we are thrilled, what’s not to love about Summer Solstice? 

Ideal Steal Swan Andirons
June brings summer, weddings, and celebration.  Named after Juno, the Goddess of Marriage
and Protector of Women, June also brings us beauty and grace.   Here at Woodstock Soapstone, 
we want to celebrate Juno by enhancing our Ideal Steal Steel of the Month with swans, the symbol of beauty, grace, and love. 

Ideal Steal Swan Side Medallion
Our swans capture the essence of love with their heart shaped silhouettes and romantic profiles.  However, while graceful in movement, swans are known for their strength and determination when protecting their mate and their young. This is why we chose these birds to grace our Ideal Steal Woodstoves.  Not only clean burning with EPA emissions at 1.04 grams/hr (per EPA tests), our Ideal Steal Woodstoves will protect you all winter against the ruthless chill of winter weather.  The Ideal Steal burns at a BTU output rate of 13,017-60,530/hr (per EPA tests).

Ideal Steal Swan Burners


Don’t wait for the ease of summer living to end before garnering your protection against winter’s ferocious wrath.  Take advantage of our Ideal Steal Steel of the Month special pricing, and grace your home with our beautiful swans.  This special pricing is only good for the month of June! 
 
Ideal Steal Swan Hanger
Ideal Steal Swan Tools

Wednesday, March 2, 2016

R2Z Detour: Introducing Our First Test Stove

As we noted in an earlier post, we are taking a slight detour in our Race to Zero.  We are testing older stoves made in the 1970s and 1980s.  Stoves which were made with little technology to reduce emissions or improve efficiency.

Huntsman Stove - Before the Makeover

Our first test stove is a “Huntsman” (made by Atlanta Stove Works, circa 1977) step stove.  It is a welded steel stove, with a huge firebox (well over 5 cubic feet), and cast iron doors with six draft controls.  The bottom is lined with firebrick, and the side walls are also lined up to 9” in height (one layer of firebrick).  As with many steel stoves of this vintage, the stove itself is almost “overbuilt” (1/4” and 5/16” boiler plate), and as long as the firebricks are replaced periodically, it will last for a few more decades.  

Huntsman Stove - After the makeover

Interestingly, even though the Huntsman stove is physically huge, it weighs almost exactly the same as our new Absolute Steel Hybrid - just over 500 pounds.

Our first goal is to establish a careful baseline profile for these older stoves in terms of heat output, emissions, and efficiency at low, medium, and high burn rates.

Next, we want to see if we can design a retrofit catalyst and heat exchanger that will improve the performance metrics (heat output, emissions, and efficiency) enough to make them competitive with some of the stoves in today’s market.

We have wired the Huntsman in our research department so that we can measure surface and gas (O2, CO2, and CO) temperatures  at multiple locations.  The stove is on a scale, which allows us to measure the rate of fuel consumption.  Finally, we can (and will) get particulate catches for most of the baseline runs using Method 5G3 (the same Method the EPA uses).  We will use the Canadian CSA B415 algorithm for calculating efficiency.  We are trying to run parallel to the same methods and standards used by the EPA.

We are using cordwood for our testing because it is readily available, and is much less expensive than the cribs the EPA has used for emissions testing during the last few decades.

We’re doing our best to keep loads representative in terms of species, weight, and moisture content.  One of the nice things about R&D testing is that we can operate with a certain degree of informality that you can’t do with certification testing.  We are just interested in seeing if we can “move the needle” before we pay attention to all of the fine points of test protocol.

We hope to get baseline data on at least three stoves (one small; one medium; and one large), and we hope to develop mathematical models for different aspects of our testing – an example would be the heat transfer achieved by our device.  More on that in the next week or so.

Obviously, there is an opportunity to reduce emissions in old stoves.  We think there are additional opportunities to extract more heat (both by radiation and convection) around the area where our device would be installed.  Without getting too esoteric, we may be able to point the catalyst directly at the surface(s) we want to use as primary radiators.  Finally, the catalyst should introduce a considerable pressure drop into the system.  This resistance may result in increased stack temperatures around our device, a reduction in stack flow, a lowering of the burn rate, and some improvement in efficiency.  Well - we are hoping to get these results!


The questions are: (1) How much of a reduction in emissions?  (2) How much additional heat extraction?  (3) How much of an improvement in efficiency?  (4) At what cost and what degree of difficulty?

We expect to be busy in the lab with this project for 3 to 4 months, at least. We don’t know if we can succeed with this R2Z Detour, but we think it’s worth making a serious effort.

Monday, February 22, 2016

R2Z Detour: Once There was a Thought...

In the beginning, there was a thought, and that thought grew into an idea, which became a project. And that was good.  We here at Woodstock Soapstone are always creating, tinkering and thinking outside the firebox. 


There are a lot of old woodstoves still in service that predate EPA regulations.   These are hefty stoves, made of cast iron or welded from plate steel and lined with firebrick.  Many are well over 30 years old, and might last another 30 years if the firebricks are periodically replaced and appropriate parts and gaskets maintained.  
Warner Stove


In our race to zero emissions, we thought we would take a side trip, a detour if you like, and look at a situation that is painful to us.  How can we get these old pre-EPA-regulation stoves that are still being used, to burn with more heat and lower emissions? These old stoves are not efficient, or clean burning.  
Warner Stove

Other people have (obviously) thought about this problem. In fact, in 2014, the Puget Sound Clean Air Agency had a retrofit design challenge to encourage development of retrofit pollution reduction devices for woodstoves.

Retrofit stove pipe catalysts have been available since the early 80's, but the concept has never been fully developed.  One of the simplest catalytic retrofits is a catalytic damper that pivots in and out of the exhaust stream (below) in an effort to reduce emissions.


Catalytic Retrofit
Similarly, others have tried to extract more heat from the stovepipe by inserting a heat exchanger downstream of the flue collar.  Some heat exchangers merely relied on convection, while others used a fan.   
Heat Exchanger

 We are in the very early stages of developing a retrofit stovepipe device that would increase efficiency and produce a cleaner burn in older wood stoves. We are eager to use today’s technology and improved materials to create a device that both increases heat output and reduces emissions.

We are in the early stages of getting baseline data for how some of these older stoves actually perform.  We have already started to fiddle around in the lab and some of the early signs are encouraging, though there are some difficult hurdles we will have to get over before we can even think about a commercially viable retrofit solution.

Consistent with our other recent projects, our goal will be a device that is simple, effective, and affordable.

We are considering making the data and development of this project publicly accessible.  Many of our customers are engineers, and we can use all of the thoughtful input we can get.   Again, we are very early in the project, but stayed tuned for the next chapter in this newest adventure here at Woodstock Soapstone.

Monday, February 1, 2016

Oops! We Stand Corrected!

A welcome correction (0.5 g/hr emissions!) is more good news.

We initially reported a weighted average emission (the number the EPA reports) of 0.7 g/hr.  An error was made.  Our weighted average emission is actually 0.5 g/hr.

This is, of course, very good news!  Results of individual runs and weighted averages are in the chart below. 

Tuesday, January 19, 2016

Our New Stove Passes EPA Testing – With Ease!

Our newest Hybrid wood stove (now known as the Absolute Steel Hybrid) passed the EPA testing with flying colors.  The EPA standard, expected no later than 2020, is for a residential wood stove to have a weighted average of approximately 2.0 g/hr.   Our new Absolute Steel Hybrid passed the test at approximately 0.7 g/hr.  Yes indeed. This result puts the Absolute Steel Hybrid in the top six stoves for low emissions.  This means our newest hybrid, the Absolute Steel Hybrid, is in the top two percent of all stoves tested in the last 25 years.  It is an absolute winner!